Industrial engineering · NPI · Defence · Semiconductors

From design to stable, full-rate production.

I am an industrial engineer who takes products from design into stable, full-rate production and improves manufacturing lines already in operation. I review product designs, set up assembly lines, optimise layouts for flow, specify jigs and equipment, lead production readiness reviews and first article inspections, and run improvement programs that increase output and sustain performance.

I started as an industrial and methods engineer at Thales and have 19 years of manufacturing experience across France, Australia and the United States. I also design and facilitate training programs so your engineers and operations teams can do this work themselves.

Packaged microchip held in tweezers

How I work

Programs I run inside your organisation.

Each program is delivered with your engineers, team leaders and operators, so the skills and systems stay with your team when I leave.

Design

Design for manufacture and risk program

Your engineering, quality and production teams review designs together from the build side: how each part will be assembled, tested and inspected.

I facilitate PFMEA workshops and coach your team to set the controls that reduce the right risks before release.

Set up

Production set-up and ramp-up program

I guide your engineers and team leaders through line set-up: routings, layouts, equipment, jigs and fixtures, work instructions and work balancing.

Together we prepare readiness reviews, first article inspection and operator training, through first builds to full-rate production.

Sustain

Performance and improvement program

I set up visual management, measures and stand-ups that your teams run themselves.

Short feedback loops between operations, engineering, design and support functions keep everyone working to the same goals.

Capabilities

What I can take on.

NPI and production set-up

  • Design for manufacture reviews
  • Process FMEA (PFMEA) facilitation
  • Bills of materials, routings and ERP set-up
  • Line, cell and workbench layout design
  • Parts replenishment flow set-up
  • Scoping and set-up of equipment, jigs and fixtures
  • Design of experiments to set process parameters
  • Work instructions and standardised work
  • Work breakdown and training

Capacity, risk and improvement

  • Capacity modelling and scale-up planning
  • Production Readiness Reviews (PRR)
  • First Article Inspection reviews (FAI)
  • Operator and team leader training through ramp-up
  • Performance measures and visual management
  • Structured problem solving between floor and engineering
  • Engineering change management systems
  • Cleanroom and SMT environments; IPC-A-610, ISO 9001, AS9100D
  • Defence
  • Naval & aerospace
  • Microelectronics & SMT
  • Semiconductors
  • Electrical manufacturing
  • Mining equipment
  • Energy
  • Caravan manufacturing
  • Optical manufacturing

Selected engagements

Defence, aerospace and NPI work.

Grey fighter jet in flight against a blue sky

Defence electronics manufacturer · France

Fighter radar antenna, prototype to full rate

Took the active antenna for a fighter radar from prototype to full-rate production: complex systems across several products, in cleanroom, SMT and PCBA environments. Optimised routings, ran line FMEAs, and designed and commissioned equipment, jigs and fixtures with calibration and maintenance systems. Trained operators and ran feedback sessions to improve manufacturability.

Impact: first full-rate production, with process controls and maintenance in place.

Naval ship at sea

Naval defence manufacturer · Australia

Sonar systems, design to delivery

Set up production of naval sonar systems from design to delivery. Wrote work instructions, procured and commissioned test equipment, bought and installed tools and jigs, and set up compliance and traceability. Optimised production flow, visual management and capacity, and trained the production team.

Impact: production set up end to end, with defence compliance and traceability.

Engineers reviewing equipment on a factory floor

Defence manufacturer · Australia

Capacity and scale-up strategy

Built an interactive parametric capacity model from 23 operational inputs drawn from ERP data, direct measurements and management inputs. It tested scale-up from 6,500 to 35,000 units a year across workforce, equipment, training and footprint, and showed where the line would break first.

Impact: the client kept the model and reused it to plan resources and equipment for growth.

Aircraft wing above the clouds

Aerospace manufacturer · France

In-flight WiFi antenna, new product introduction

Introduced the first Airbus airborne module for in-flight WiFi into production. Set up production BOMs, routings, a full suite of standard work and instructions, compliance documents and engineering specifications. Designed, procured and set up jigs and fixtures, including a custom microstrip precision forming tool, and led production readiness audits, first article inspection and FMEAs before release.

Impact: module delivered on target and to specification.

Two patterned silicon wafers

Semiconductor research centre

Plasma etching process settings

Ran a multifactorial design of experiments on a plasma etching machine used in silicon wafer manufacturing, testing the full range of inputs to learn how gas mix, temperature and pressure drive etch depth and width.

Impact: a standard settings guide giving the exact gas quantities, temperature and pressure for each target result.

Operators working along an electronics assembly line

Electrical equipment manufacturer · USA

Assembly line optimisation

Led a cross-functional program with engineering and operations to optimise assembly lines. Coached the production engineers in work measurement, line balancing, workstation design and waste reduction, so they could find and implement improvements on their own. Facilitated alignment sessions between engineering and operations and set up a shared improvement system to co-design manufacturing practices.

Impact: output from 20 to 45 units an hour (+125%) and ergonomic strain score down 33%.

Photos are illustrative and do not show client sites or products.

Working together

Engagement model.

  1. Available for

    Associate industrial engineer for consulting firms, NPI and production set-up, PFMEA facilitation, readiness reviews and training.

  2. Terms

    Independent contractor, day rate or fixed scope. ABN, insurance and NDA on engagement.

  3. Location

    Sydney based, available across NSW and interstate. Able to deliver live online.

Master of Industrial Engineering, ECAM France · Lean Six Sigma Green Belt, SAI Global · Creative Problem Solving, University at Buffalo · English and French fluent